Your feedback means the world to us; please leave any comments or questions on the preview page!
Customer Support: If you have any questions or concerns or need assistance, please don't hesitate to contact our customer support team at [email protected]. We're here to assist you and ensure you have an exceptional experience with your Jollylook Pinhole SQUARE DIY kit.
Remember to share your creations with us on social media using the hashtag #jollylook.
Once more, we sincerely thank you for your support and trust throughout this incredible journey. Your contribution has been instrumental in making all of this possible, and we couldn't have done it without you!
Stay Jolly!
Until next time,
The Jollylook Team
All Rewards Shipped, US Delivery ETA and Launching Jollylook EYE!
over 2 years ago
– Thu, Nov 09, 2023 at 09:19:32 AM
Hello to All the Beautiful People of our Big Jollylook Community!
We want to express our heartfelt gratitude for backing our project and turning it into a reality!
We are excited to be back with a major update:
All Rewards Shipped!
We are thrilled to announce that we have successfully shipped all the rewards to our beautiful backers! Your support, patience, and enthusiasm have brought us to this significant milestone, and we're grateful for each and every one of you.
Canadian and Mexican Rewards: To ensure faster delivery, we have shipped all the rewards for our Canadian and Mexican backers directly from Slovakia. This approach allowed us to optimize shipping times and better serve our community.
US Rewards: During the past two weeks, our team has been working hard to pack and labeling all the rewards. And yesterday they were finally picked up by FedEx from our office in Slovakia!
They are now en route to Miami airport, Florida. If all goes well, in about 10 days the pallets with the US rewards will arrive at our shipping partners warehouse in Florida. Then they will be forwarded to USPS, as soon as the USPS receives them, you tracking links will start working. It shouldn't take more than three days after that to deliver all the rewards to their final destination. SO expect your reward in about 2 weeks.
We can't wait for you to receive your Jollylook SQUARE kits. When you get them, be sure to share your creations with us on social media using the hashtag #Jollylook. We love seeing your work and celebrating your creativity.
Thank you once again for your unwavering support and patience throughout this journey. We couldn't have achieved this without you!
As a fan of ours, we ask you to follow our pre-launch Kickstarter page. Clicking "Notify me on launch" will help ensure we have the strongest launch possible.
The Jollylook EYE printer is an analog foldable instant photo printer that is compatible with Fujifilm Instax Mini Film. It captures your cherished moments from your phoe screen, gives you the opportunity to hold your favorite memories in your hands, and feel the raw emotions as you watch your photos develop right in front of your eyes!
Should there be any instances where you have not received your reward, or if you have any inquiries, please do not hesitate to reach out to us at [email protected].
Stay Jolly!
Until we meet again,
The Jollylook Team
Shipping Started! 🥳
over 2 years ago
– Fri, Oct 06, 2023 at 08:53:35 AM
Hello to All the Beautiful People of our Big Jollylook Community!
Thank you for making our project a reality!
This is it! The most exciting moment we have all been waiting for!
All the plastic parts for the SQUARE film development units are already in Slovakia and we are delighted to announce that we are packing all our Jollylook Pinhole SQUARE Instant Film Camera DIY Kits and expect to have all the rewards shipped in the next 30 days.
There's not much left to go on!
Our Plan:
As the number of our north american backers and rewards is the highest, we will pack all the rewards on one pallet and will ship this pallet from Slovakia at the end of next week.
Within 10-14 days, the pallet will be delivered to our fulfillment partners in Florida, from where all the rewards will be finally shipped to our beautiful backers.
We expect all American backers to receive our Jollylook Pinhole SQUARE Instant Film Camera DIY Kits by the end of October.
On the 9th of October, we are planning to start shipping all the rewards to Europe and the rest of the world via the Slovakian postal service. All our European backers will be receiving thier Jollylook Pinhole SQUARE Instant Film Cameras and DIY Kits during the coming weeks.
As soon as we ship your order, you will get an automated email from Backerkit with your tracking link. So watch your inbox!
We are filming and posting the process of manufacturing, packing and preparing the Cameras and DIY Kits for shipping, you can check it on our Instagram!
Thanks once again for your continuing support, without you, this project would not be possible, and because of you, it will succeed.
Stay Jolly!
Until next time,
The Jollylook Team.
Goodbye Summer, Hello Packing and Shipping!
over 2 years ago
– Thu, Aug 31, 2023 at 10:08:07 AM
Hello to All the Beautiful People of our Big Jollylook Community!
Thank you all so much for the massive support.
Thank you for making our project a reality!
During the past month, we have received all the samples of all the parts, and today is a great day to share all the news with you! Last day of summer :(...
Our progress:
The whole batch of rollers for the Jollylook SQUARE film development units has already arrived in our office in Slovakia.
The whole Batch of Rollers for the Jollylook SQUARE Film Development Units
Rollers for the Jollylook SQUARE Film Development Unit
Two weeks ago, we received the SQUARE bellows from Kharkiv, Ukraine. We have already assembled and tested them. The quality is perfect and they work great and look really nice!
We are very touched that many of you were asking about the safety of our partners and their families in Ukraine. Thank God they are all safe and are already working on rebuilding our country.
After the tests, we placed the order for the whole batch of the SQUARE bellows; it should be ready for shipping from Kharkiv to Slovakia in a few days.
Also, during this time, our team has been actively cutting the wooden parts of the camera bodies on our laser-cutting machines and packing those parts in their bags. All the wooden parts are ready and packed. And we also packed all the other parts like screws and wax.
Wooden Parts of the Camera Bodies
Parts and the Bag
Our current plan:
All the plastic parts for the SQUARE film development units are already on their way to Slovakia from China, and we expect to receive them in 12-15 days. As soon as they arrive, we will start packing and shipping all the Jollylook Pinhole SQUARE DIY Kits to our beautiful backers.
We will post our next update at the end of September to let you know how things are going and, hopefully, to inform you that shipping has started.
We can't wait to send you your genuinely unique SQUARE kits!
Thanks once again for your continuing support. Without you, this project would not be possible, and because of you, it will succeed.
